C92800

ALLOY SEARCH MODULE

GET STARTED
SEARCH CLEAR

SPECIFICATION CROSS-REFERENCE CHART

Cast

The lead content in these bronze alloys is between 7 percent 天天斗牛15 percent. High leaded tin bronzes alloys are free cutting 天天斗牛retain favorable thermal conductivity 天天斗牛good lubricity due to the lead content. Alloy C93200 is considered this family’s workhorse alloy 天天斗牛is widely used in many bearing applications.

Info

Product Description:. Leaded Tin Bronze
Solids: 1/2" to 13" O.D.
Tubes: 1" to 16" O.D.
Rectangles: Up to 20"
Standard Lengths: 144"
Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar

Typical Uses

Industrial: bushings, corrosion-resistant castings, piston rings

Similar or Equivalent Specification

CDA ASTM SAE AMS Federal Military Other
C92800 B505
B505M
  7320      

Chemical Composition

Cu%1 Pb% Sn% Zn% Fe% P% Ni%1,2 Al% S% Sb% Si%
Chemical Composition according to ASTM B505/B505M-18

1In determining Cu min., Cu may be calculated as Cu + Ni.   2Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.3% min. Single values represent maximums.
78.00-
82.00
4.00-
6.00
15.00-
17.00
 
0.80
 
0.20
 
1.50
 
0.80
 
0.005
 
0.05
 
0.25
 
0.005

Machinability

Copper Alloy UNS No. Machinability Rating Density (lb/in3 at 68 °F)
C92800 70 0.317

Physical Properties

Physical Properties provided by CDA
  US Customary Metric
Melting Point - Liquidus 1751 °F 955 °C
Melting Point - Solidus 1505 °F 818 °C
Specific Heat Capacity 0.09 Btu/lb/°F at 68 °F 377.1 J/kg at 20 °C
Modulus of Elasticity in Tension 16000 ksi 110000 MPa

Fabrication Properties

Fabrication Properties provided by CDA

*Since brazing is performed within the hot-short range, strain must be avoided during brazing 天天斗牛cooling.
Technique Suitability
Soldering Excellent
Brazing* Good
Oxyacetylene Welding Not Recommended
Gas Shielded Arc Welding Not Recommended
Coated Metal Arc Welding Not Recommended
Machinability Rating 70

Thermal Properties

Thermal Properties provided by CDA

*Temperature is measured in Fahrenheit.   **For Stress Relief, Solution Treatment 天天斗牛Annealing - Time is measured in hours/inch of thickness. For Precipitation Heat Treatment - Time is measured in hours.
Treatment Value* Time**
Stress Relief 500  
Solution Treatment   0

FIND A PRODUCT

SEARCH BY
CDA NUMBER
ӣ赌博软件  Ӯ  ȫӮ  宝马棋牌  纯真棋牌    聚友棋牌  ֻ  ţţ  춷ţ    ͬ˳  赌博网  Ӯ  app  ը  休乐炸金花    Ӯ  ը